YSMNDE Personalized Name Neon Light Review
1K views
Jun 16, 2025
In this video, I review the YSMNDE Personalized Name Neon Light. Check it out here: https://amzn.to/47jiqlI DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
View Video Transcript
0:00
So YSMND just sent me this custom neon sign so I'm really excited to go ahead and take a look at it
0:05
and give a first impressions of this. So now with all these plastic bits and the tape right off
0:12
this part just comes right off just like this on all sides
0:19
And right here, this thing is really big. It includes this sheet which shows everything that it comes with
0:24
And here's on the back side. But of course the most important thing is going to be the neon sign itself
0:29
So here's gonna be the power adapter, the remote control, the dimmer, and some chains to hang it up
0:37
So here's a look at it, and I think it ended up turning out really nice
0:41
Now I did get the customized part where this is gonna be to the letters
0:45
Otherwise, there was an alternative where it could be like blocky or just circular, but I thought this one would look nicer one
0:50
And here you can look the back looks like and then at the bottom, we're gonna have the wire that goes ahead and attaches everything
0:56
So let me get this set up. So there's gonna be two ways to install this I could either go ahead and screw it directly onto the wall and it comes with these bits
1:04
So there's like plastic bits that I can put in these holes just to protect it from breaking or the second way
1:09
Which is what I'm gonna do. I'm just gonna go ahead and put a screw up there and then hang it from this chain
1:14
So it actually comes with two chains over here two of them And I could just pass these bits just through these holes over here And then this just comes off just like that now go ahead and put it right through here That one and that two Now I can grab it from the center over here and just place it right
1:31
on top of here on top of this screw. Now comes the cool part of actually turning it on and I do get a
1:36
remote control right over here. It does take two AAA batteries which I already went ahead and put
1:42
right there. And there's going to be a bunch of different buttons. We're going to have the on
1:46
button the off this to control brightness the speed the light the mode all the different levels
1:52
so I can go from 10% all the way to 100% and then over here it's going to give me time 5 10 30 or 60
2:00
so let me go ahead and turn it on that's 100% and it's so bright you can't even see me but just
2:06
just look at that that looks so cool it's really bright but let me go ahead and put it at 50
2:12
let me put it at 10 and even at 10 it still looks cool the background's kind of washed out because
2:18
it's so bright over here there now it's kind of back to normal but let me let me put that back
2:24
there and yeah now over here here if you can see here i can go ahead and increase the brightness
2:30
as you can see it's increasing and then i can go ahead and decrease the brightness as well too
2:35
and it's decreasing all the way down until it's at zero so let me just put it at one which would
2:44
be ten percent and then right over here let me see what this does if i just press light yeah so it lights it up all the way to 100 and if I press it again yeah nothing So this just goes to 100 Mode So here one of the modes
2:55
It goes on, off. Okay, that's actually pretty cool. And then you press it again
3:01
So this is next mode, so it goes a little bit quicker, it seems like. And then you press it one more time
3:08
Okay, now it's just flashing. Yeah, that's sick. Now one more time
3:11
Alright, now it's flashing a little bit slower, I think. One more time
3:17
Yeah, that's really... Oh wow, yeah, that's really bright. Let me press it one more time
3:25
Alright, now on and off slowly. And then speeding up a little bit
3:30
Alright, now let me press it again. Oh yeah, that's like strobe light right there
3:36
And let me press it one more time. this just goes in and out kind of pulsating and this one just dims it to 100% all the way to zero
3:47
and then one more time all right just a little bit quicker and then I think it goes back to normal
3:53
yeah it just repeats the whole cycle so I guess if I just press light it'll stay just like that
4:00
or let me see if I press like a button over here if I press 50% yeah if I press any other button
4:06
that not mode it just bring it back to this still part over here Now if I want to control the speed of that mode I could have just increased it really fast or decrease it and it goes really slow so I just go back So yeah overall I really happy with this happy
4:23
birthday neon sign and there's a bunch of customization that can be done. Again I wanted
4:28
this type of font because I think this was like the most readable one. The other ones that were
4:32
script were just a little bit too just a little bit too messy and for my liking I thought this
4:37
one looked the nicest. As far as like shape goes, I got it cut to the board so you can see it's like
4:42
cut to the letters but there were other options too if you wanted it just to be like rectangular
4:46
or if you wanted like a hard shape. For colors, I just wanted this single color, this like warm
4:52
light but there also did come with RGB options. Same thing, it did come with an optional remote
4:57
which I did want as well too but yeah, you can definitely customize this a lot. You can have one
5:01
line, two lines, three lines but I wanted the happy birthday in two lines. I think this one looked
5:06
nicest and it's pretty universal so I can use this multiple times in the year you know when
5:11
it's somebody's birthday you just pop this up and boom happy birthday right there but yeah overall
5:17
I'm really impressed with this neon sign I think it looks really nice and again there's a bunch of
5:22
different ways you can go ahead and install it you can make get it a cleaner look if you didn't
5:27
use the chain and you just went ahead and just installed it just by drilling over here but I
5:32
I like this option, it was probably the easiest one to do and I only had to drill one hole right on top of there
5:38
But yeah, that's a quick look at the neon sign
#Computers & Electronics