Horner XL4 Timers and Counters - All In One

Timers and counters are used in the majority of PLC programs. We will not look at how timers and counters can be programmed in the Horner XL4 OCS all-in-one controller. This series on the Horner XL4 all-in-one controller (PLC) will go step by step through learning how to use this innovative unit. More information can be obtained at our website. This includes all of the links mentioned in this video. https://accautomation.ca/horner-xl4-timers-and-counters Previously we discussed the following on the Horner XL4: System Hardware. https://accautomation.ca/horner-xl4-system-hardware/ Installing the Software Cscape https://accautomation.ca/horner-xl4-installing-the-software-cscape Horner XL4 Cscape Software Setup https://accautomation.ca/horner-xl4-cscape-software-setup Horner XL4 Establishing Communication https://accautomation.ca/horner-xl4-establishing-communication Horner XL4 Numbering System and Addressing https://accautomation.ca/horner-xl4-numbering-system-and-addressing Horner XL4 User Interface https://accautomation.ca/horner-xl4-user-interface There are several reasons why we are using the Horner XL4 Controller. Here are just a few. - Investment is low for the hardware and the software is free - Standalone PLC with built in I/O and HMI - Communication ability - Ethernet Port, RS232, RS485 - support for protocols such as Modbus RTU, Modbus TCP, etc. - Built in data logging functions - Ability to expand the system with a variety of modules https://www.accautomation.ca