Construction & Maintenance
Software
BRX Do-More PLC Online Editing and Debug Mode
86 views
·
Oct 15, 2022
We will now look at online editing and the powerful debug mode of our BRX Do-More controller. Our first program for the BRX Do-More PLC involved a start-stop jog circuit. We will now use the Do-More Designer Software to modify this program while the PLC is scanning the logic. This is referred to as online programming or online editing. As a system integrator, this ability can prove very useful to you in the field when commissioning your automation system. We will also be using the special Debug Mode of the software to monitor the ladder logic status and bits on a scan by scan basis. Forcing the inputs and outputs, we will control the execution of the PLC scan. This is a great feature of the Do-More Designer software.
Here is a link explaining the logic behind our circuit.
How to Make a Start Stop Jog Circuit in a PLC
https://accautomation.ca/how-to-make-a-start-stop-jog-circuit-in-a-plc/
Let’s get started!
More information can be obtained at our website. This includes all of the links mentioned in this video. https://accautomation.ca/brx-plc-online-editing-and-debug-mode
Previously in this BRX Do-More Series PLC, we looked at the following:
System Hardware
https://accautomation.ca/brx-plc-system-hardware
System Hardware Video
https://youtu.be/wSYgY09VYeA
Unboxing Video
https://youtu.be/-Tf8m3BqzPo
Installing the Software
https://accautomation.ca/brx-plc-installing-the-software
Installing the Software Video
https://youtu.be/iFI1ebP8Zkk
Establishing Communication
https://accautomation.ca/brx-plc-establishing-communication
Establishing Communication Video
https://youtu.be/shU5g8MA8VM
Updating Firmware Video
https://youtu.be/gsfcGGK4-Sk
Numbering Systems and Addressing
https://accautomation.ca/brx-plc-numbering-systems-and-addressing
Numbering Systems and Addressing Video
https://youtu.be/-GiKnIDycKY
First Program
https://accautomation.ca/brx-plc-first-program
First Program Video
https://youtu.be/ANSNhdlm_Ao
Monitoring and Testing the Program
https://accautomation.ca/brx-plc-monitoring-and-testing-the-program
Monitoring and Testing the Program Video
https://youtu.be/gv3d0vozxac
There are several reasons why we are using the BRX Series Controller. Here are just a few.
- Standalone PLC with built-in I/O
- Built-in Data Logging
- Communication ability - Ethernet Port, RS232, RS485, USB - support for protocols such as Modbus RTU, Modbus TCP, ASCII, K-sequence (DirectLOGIC users), Custom Protocols (ASCII over serial, TCP or UDP over Ethernet)
- Built-in Analog input and output
- Integrated motion control
- High-speed counters
- Powerful instruction set (Video of Instructions in software)
- Ability to expand the system with a variety of modules
- Part of the Do-More series of PLCs which use the same free software. (Do-More Designer)
- Integrated simulator in the software capable of external communications for testing
The BRX series of programmable logic controllers consist of four different units. They differ depending on the Inputs and Outputs built into the unit and if it has an ethernet port. No I/O Micro PLC unit – (BX ME)
10 Point Micro PLC unit – (BX 10/10E)
18 Point Micro PLC unit - (BX 18/18E)
36 Point Micro PLC unit - (BX 36/36E)
These CPUs (Central Processing Units) are also known as MPU (Multi-Processing Units) because of the communication capabilities.
https://www.accautomation.ca
Show More
Show LessComments
loading text loading
loading text loading
loading text
loading text loading
loading text
loading text loading
loading text
loading text loading
loading text