Brand Management
Engineering & Technology
CTT Counter Timer Tachometer – Tachometer Mode
2K views
·
Oct 14, 2022
We will now look at the tachometer mode of our CTT - Counter Timer Tachometer.
The CTT series from Automation Direct are multi-function digital units. They incorporate a multi-function digital counter, timer, and tachometer all within the same unit. Tachometer mode will bring in pulses that can be from a sensor, incremental encoder, etc., and convert this to a rate. Rates such as speed or frequency deal with units per time. The CTT makes converting and using these pulses easy. The tachometer mode has four different output settings; 2Lo1Lo, 2Lo1Hi, 2Hi1Lo, and 2Hi1Hi.
We will be reviewing the tachometer mode of the CTT and programming a rate based on the frequency of a relay output of a PLC. Let’s get started.
https://accautomation.ca/series/ctt-multi-functional-digital-counter-timer-and-tachometer/
More information can be obtained on our website. This includes all of the links mentioned in this video. http://accautomation.ca/ctt-counter-timer-tachometer-tachometer-mode
Previously in this CTT Counter Timer Tachometer Series, we looked at the following:
CTT Counter Timer Tachometer - Getting Started
http://accautomation.ca/ctt-counter-timer-tachometer-getting-started
Un-boxing the CTT - Video
https://youtu.be/BOeANerzens
Powering up the Unit - Video
https://youtu.be/M-kL__7Gd70
CTT – Timer Modes
http://accautomation.ca/ctt-counter-timer-tachometer-timer-modes
Signal On Delay 1 Timer
https://youtu.be/XaSSY3WdECk
Signal On Delay 2 Timer
https://youtu.be/fLHPjXIvcxE
Signal Off Delay Timer
https://youtu.be/UjQAbBG6kd8
Signal On Timer
https://youtu.be/pLTQpH0kDAI
Power On Delay Timer
https://youtu.be/BbLAhb8Njlg
Power On Delay Hold Timer
https://youtu.be/7pRJs7EvS70
Repeat Cycle Timer
https://youtu.be/8Xb4ecRJlq4
Repeat Cycle Hold Timer
https://youtu.be/Ksw84Np9w18
Repeat Cycle 2 Timer
https://youtu.be/zt8rd3x-K78
Signal Cumulate Timer
https://youtu.be/qG6m8Ac6q9w
Signal Twin On Start Timer
https://youtu.be/Gim8G3PZgTw
Signal Twin Off Start Timer
https://youtu.be/0WggxXD7ssk
CTT Counter Timer Tachometer – Counter Modes
http://accautomation.ca/ctt-counter-timer-tachometer-counter-modes
Stage 1 Counting
https://youtu.be/1yrwF8uaB4s
Stage 2 Counting
https://youtu.be/s6yCUptKDCs
Batch Counting
https://youtu.be/GL6tJob3z9Q
Total Counting
https://youtu.be/XRXFRY283Rg
Dual Counting
https://youtu.be/AuTxaL0dhLc
CTT Counter Timer Tachometer – Counter Timer Mixed Modes
http://accautomation.ca/ctt-counter-timer-tachometer-counter-timer-mixed-modes
Signal On Delay 1 Up
https://youtu.be/-Q_Xu1Bd8rc
Signal On Delay 2 Up
https://youtu.be/k64vCaVGOaw
Signal Off Delay Up
https://youtu.be/XlEpT3rkrjs
Signal On Up
https://youtu.be/ud4VVCxMeb4
Power On Delay Up
https://youtu.be/4kw-mLJSDxo
Power On Delay Hold Up
https://youtu.be/Ujxr4pZdRx4
Repeat Cycle Up
https://youtu.be/j7Z1FUrT35Q
Repeat Cycle Hold Up
https://youtu.be/u3tw7NBbAk0
There are several reasons why we are using the Automation Direct CTT Digital Counter Timer Tachometer. Here are just a few.
- Can operate as a digital counter, timer, combination timer + counter, or tachometer
- Accepts voltage and non-voltage inputs from a wide variety of NPN, PNP, or dry contact sensors
- Selectable counting speeds from 1 to 10,000 cycles per second
- Multiple transistors and relay outputs can operate as momentary or maintained
- Double-line, 6-digit, 2-color LCD display
- Easy configuration with externally accessible DIP switches or the lockable keypad
- Display decimal point selection
- Available in 100-240VAC and 24VDC powered models
- UL508 listed (E311366), cULus, CE marked
http://www.accautomation.ca
Show More
Show LessComments
loading text loading
loading text loading
loading text
loading text loading
loading text
loading text loading
loading text
loading text loading
loading text